temperature reduction
英 [ˈtemprətʃə(r) rɪˈdʌkʃn]
美 [ˈtemprətʃər rɪˈdʌkʃn]
网络 温度还原
英英释义
noun
双语例句
- That is because of increase of heat loss associated with the increase of air supply, besides the reduction of particles in the flame is another reason for the temperature reduction.
这一方面由于增加的空气带走了大量的热量，同时，火焰中烟灰颗粒浓度的不足，会引起所测火焰温度的降低。 - The results showed that the temperature reduction coating had high emissivity, high reflectivity and make the temperature dropped 4~ 8 degree; the phase change coating had both function of good temperature self-adaptive and better thermal camouflage and IR fusion effect with the background.
结果表明，降温涂层具有高发射率、高反射率和4~8℃的降温效果；相变涂层具有优良的温度自适应功能，并在短时间内可实现对热源的伪装效果及与背景的融合性。 - Combined with phase change coating and other functional coating, thermal infrared phase changed& temperature reduction composite stealthy coating was prepared, which reduced the difficulty of individual application the phase change materials to thermal infrared stealthy, and the performance of every coatings were tested.
将相变涂料与其他功能涂层结合，制备出热红外相变&降温复合隐身涂层，降低了单独将相变材料应用于热红外隐身的难度，并对各涂层的性能进行了测试。 - According to the principle, this article examines relative process used in gas gathering station using initial pressure energy of natural gas for throttling temperature reduction and gives a calculation method of injection volume of methanol to inhibit formation of hydrate during throttling temperature reduction.
本文运用这一原理，研究利用天然气原始压力能，实现节流降温在集气站所采用的工艺流程，给出了在节流降温过程中，不形成水化物所需的甲醇注入量的计算方法。 - But RDI ( low temperature reduction degradation ( index)) of imported pellets and lump ores is higher than that of high basicity sinters.
但进口球团矿和进口块矿的低温还原粉化指数高于高碱度烧结矿； - Application of Non-mechanical Temperature Reduction Technology in Mine with Heat Disaster Danger
非机械降温技术在高温热害矿井治理的应用 - Study on the causes of al_2o_3 aggravating low temperature reduction degradation of sinter
Al2O3加剧烧结矿低温还原粉化原因的研究 - Because of high temperature reduction is the traditional synthesis method, and the characteristics of the materials were impacted by synthetic temperature, calcining time, the content of carbon additives, impurities.
因采用的是高温还原传统的合成方法，材料的特性受到合成温度，煅烧时间，碳添加剂的含量，杂质等因素的影响。 - This paper expounds the internal connection and regularity among sintering technological conditions, microscopic structures of sinter and degradation during low temperature reduction.
本文阐明了烧结工艺条件、烧结矿微观组织结构与烧结矿低温还原粉化的内在联系和规律。 - The constant volumetric delivery and melt temperature reduction bring a significant improvement in the quality of the end product.
稳定的体积流量和降低熔体温度对于改善最终产品的质量有重要意义。